DIY Wedding RSVP Card Keepsake Book Tutorial

Doing the birthday card keepsake book for Gabby inspired me to see what else I could bind into a book. I dug through our box of wedding stuff and found stacks of wedding cards. We had over 200 guests and tons of out of town guests who sent cards. I think I'll save that project for another time.

I found our RSVP cards that I have been saving for the day I figure out what to do with them. We had asked guests to write some wishes or words of wisdom on the back of the cards. We received quite a few creative and funny ones. Some people drew pictures, glued on photos or wrote quotes. One even attached a saying from a fortune cookie. I'm really happy we still have these mementos from our wedding.

The difference between this book and the birthday card book is that this one has a hard cover and I didn't need to sew the spine together.

Pictures of the materials used and more details on the process can be found under this post.

Materials Needed: 

• RSVP Cards
• PVC Glue (I still had a tub I bought for $8 four years ago from Paper Source, but it's $10 now). 
• 2" Wide Book Cloth Tape in Blossom (10 foot tape roll is $6.50 from Paper Source)
• 3-4 Large Binder Clips or Clamps
• 3-4 Craft Sticks or Cardboard
• 1 Foam Brush 
• Scissors
• Bone Folder (Optional)
• Bookboard or Thick Cardboard
• Exacto Knife
• Two sheets of decorative paper
• Extra paper for the first and last protector page

All the RSVP Cards:





Cards Ready to be Glued: I made a mistake and forgot to add one or two blank protector pages at the beginning and end of the book. These pages will be glued directly to the hard cover of the book and help secure the book to the cover.

Glued and Waiting to Dry:

Close-up of the Glued Spine: Again, make sure you have blank pages at the beginning and end. I had to add it after the fact and is not as secure.

Inside the Book:

Supplies for the Book Cover:

Cut the Bookboard with an Exacto Knife: My cutting skills need work.

I cut and glued a decorative paper sheet to each board, leaving a small gap for the book tape. I accidentally cut the pink book tape a little short so patched it. I used a thin strip of cardboard from a notepad I had to use as the spine. Leave a quarter inch gap between the spine cardboard piece and front/back cover so that you can close the book.


Putting Together the Cover:

The Inside Cover: 

The Front Cover:

Take your book and spread glue on the front page, back page and spine. Lay the text block straight onto the spine of the cover and close the book. This will bind the book right to the cover.

The Finished Wedding RSVP Card Keepsake Book:

DIY Birthday Card Keepsake Book Tutorial

I came across this link on Pinterest and wanted to do something similar with all of Gabby's second birthday cards. Instead of having a pile of loose greeting cards, I was able to bind a neat notebook that's also easy to store.

Materials Needed:

• Greeting Cards
• PVC Glue (I still had a tub I bought for $8 four years ago from Paper Source, but it's $10 now). 
• 2" Wide Book Cloth Tape in Blossom (10 foot tape roll is $6.50 from Paper Source)
• 3-4 Large Binder Clips or Clamps
• 3-4 Craft Sticks or Cardboard
• Medium Sized Needle
• Pink Embroidery Floss
• 1 Foam Brush 
• Scissors
• Bone Folder (Optional)

Some of the supplies. Didn't end up needing any of the scrap paper.

Gabby's Birthday Cards: The card on top is from us and will be the front cover of her book. 

Sort and Clip the Cards:

I took the advice from the original poster and sorted the cards so short and tall cards are mixed in together. You don't want two short cards next to each other and create a big gap in the spine of your book. Use the biggest two cards to serve as the cover and last page of your book.

This next step is optional since the original poster didn't do this and her book seems just fine. I took it a step further and "bound" all the cards together. I wanted extra security so nothing fell out over time. The glue I used was four years old so might not be that great anymore. 

I found the shortest card in the stack and used that as a guide as to where to poke two holes in all the cards. Using a medium sized needle, I poked holes in all the cards in the same spot. 

Sewing the Cards Together:

Using about 4-5 strands of thread from the embroidery floss, I started with the bottom of the last page of the book and threaded the needle into the card. I looped the thread through the inside of the card and out the through the top hole. Then I placed the next card on top and threaded it through the top of that card, looped through the inside and out the bottom hole. Do that again for the third card - in through the bottom hole, loop inside and back out the top hole. Now I was able to slip the needle back through the previous card to tie it together. 

Cards Sewn Together: 

Since the edge of the back cover isn't tied to anything, I took the loose string from the front cover and tied it to one from the back cover. Trim the excess strings. I left about an inch but you can cut it shorter if you want. It doesn't matter too much since it will be covered with the spine anyways.

Gabby received a couple of cards that opened from the top so I cut it and just stacked them in with the rest without sewing. The glue should be strong enough to keep them in place. 

Prepping the Cards Before Gluing: 

The cards are still a bit floppy so I secured them together with large binder clips before gluing. Make sure you protect your cards from indentation by putting either craft sticks or cardboard underneath the clips. Now that the cards are secure, I applied a generous layer of PVC glue along the spine. Enough to get all the edges of the cards coated without it being a drippy mess. 

After the Glue is Dry:

It took a few hours for the glue to dry for me. It may vary for you so make sure the glue is completely dry before you move on. 

Adding the Spine:

Next, I measured and cut a piece of book cloth tape to the same length as my longest card. To make a crisp edge on the spine, I used a bone folder to make folding lines on the book cloth tape. You could use the edge of a craft stick to make the crease and that should work too.

The glue that is on the book cloth tape isn't that tacky so I dabbled the PVC glue all over the tape before putting it on the cards. 

The Finished Birthday Card Keepsake Book Project:

The Back:

I may go back and make a book for Gabby's first birthday as well. The only problem is she doesn't have a card from us. I never thought we would really be keeping all these cards so I didn't bother giving her one. From now on, I think I'll put together one of these books. It'll be a neat keepsake of all her birthdays, maybe even combine a few years together.